Grundig GSBS 23340 FX Manuel D'utilisation page 28

4. After completing the connection, plug
the pump into the socket and start the
pump.
After starting the pump, wait 2-3
minutes for it to reach the desired
efficiency.
Refer to the instruction manual of
the pump while making the water
connection.
If carboy will be used, there is no
need to use a water filter.
Water filter
(This feature is optional)
Depending on the model, your product may
have an external or internal filter. To install
the water filter, follow the instructions be-
low.
Mounting the external filter on the wall
(This feature is optional)
WARNING
Do not install the filter on the
product.
Depending on the model of your product,
check whether the following parts are in-
cluded with the product:
1. Union (1 piece) : Used for attaching the
water hose to the back of the product.
2. Faucet adapter ( 1 piece ) : Used for
cold water mains line connection.
3. Porous filter ( 1 piece )
4. Hose clip ( 3 pieces ) : Used for fixing
the water hose to the wall.
5. Filter connection apparatus ( 2
pieces ): Used for mounting the filter
on the wall.
6. Water filter (1 piece): It is used to con-
nect the mains water to the product. If
there is a carboy connection; there is
no need to use a water filter.
7. Connect the faucet adapter to the
mains line valve.
8. Determine the place where the external
filter will be fixed. Mount the filter con-
nection apparatus ( 5 ) on the wall.
9. Attach the filter perpendicularly to the
filter bracket as indicated on the label.
( 6 ).
EN / 28