Siemens KG39N2LDA Mode D'emploi page 31

Controls
Fig. "
Display alarm
1
This lights up if the appliance
becomes too warm.
2
Selection button for refrigerator
compartment
Is used to set the temperature
in the refrigerator compartment.
3
"super" display
Illuminates, if the super cooling is
in operation.
4
Temperature display refrigerator
compartment
The numbers correspond to the
set refrigerator compartment
temperatures in °C.
5
Eco indicator
This lights up when eco mode is
switched on in the cooling
compartment.
6
Temperature selection button
freezer compartment
The button sets the temperature
in the freezer compartment.
7
"super" display (freezer
compartment)
Illuminates when super freezing
is on.
8
Temperature display freezer
compartment
The numbers correspond
to the set freezer compartment
temperatures in °C.
9
Eco indicator
This lights up when eco mode is
switched on in the freezer
compartment.
Switching on the
appliance
Fig. "
1. Insert the plug in the socket.
2. A warning signal sounds. The
temperature display 8 flashes.
3. Press the temperature setting button
2. The warning signal switches off.
When the freezer compartment has
reached the set temperature, the
temperature display 8 is lit.
The factory recommends the following
settings:
Refrigerator compartment: medium
■
setting
Freezer compartment: -18°C
■
Store delicate foods in the refrigerator
compartment.
Operating tips
When the appliance has been
■
switched on, it may take several hours
until the set temperatures have been
reached.
The fully automatic NoFrost system
■
ensures that the freezer compartment
remains free of ice. Defrosting is no
longer required.
The sides of the housing are
■
sometimes heated slightly. This
prevents condensation in the area of
the door seal.
If the freezer compartment door
■
cannot be immediately re-opened after
it has been closed, wait until the
resulting low pressure has equalised.
en
31