Technibel Climatisation DSAV92C5TA Notice D'utilisation page 3

NAME OF PARTS AND OPERATION SELECTOR
INDOOR UNIT
1. Remote control unit.
2. Sensor: Detects the room temperature around the remote
control unit, the air conditioner is controlled accordingly.
3. Receiver: This section picks up infrared signals from the
remote control unit (Transmitter).
4. Air outlet: Conditioned air is blown out of the air conditioner
through the air outlet (four flaps).
5. Air filter.
6. Suspension brackets.
7. Refrigerant couplings.
2
1
8. Condensate drain connection.
9. Electric junction box.
10. Operation selector.
ON Position: In this position the air conditioner is operating
and controlled by the remote control unit.
Set the selector normally in this position.
OFF Position: Switch the selector to the off position if you
are not going to use the air conditioner for
a few days or longer.
WARNING
The OFF position does not disconnect the power. Use the
main power switch to turn off power completely.
CAUTION
TEST Position: This position is used only for servicing the
air conditioner, so don't leave the selector in
this position for normal operation.
3
EG