Facom CL3.C18S Notice Originale page 25

Consult your dealer for further information on the appropriate accessories.
WARNING: Use only impact accessories. Non-impact accessories may break and cause a hazardous condition. Inspect accessories prior
to use to ensure that it con tains no cracks.
Repairs
The charger and battery pack are not serviceable. There are no serviceable parts inside the charger or battery pack.
To assure product SAFETY and RELIABILITY, repairs, maintenance and adjustment (including brush inspection and replacement) should be
performed by a FACOM authorized service center or other qualified service personnel. Always use identical replacement parts.
Protecting the environment
DISPOSAL OF THIS ARTICLE
Dear Customer, If you at some point intend to dispose of this article, then please keep in mind that many of its components consist
of valuable materials, which can be recycled.
Please do not discharge it in the garbage bin, but check with your local council for recycling facilities in your area.
Separate collection of used product and packaging allows materials to be recycled and used again.
Re-use of recycled materials helps prevent environmental pollution and reduces the demand for raw materials.
Rechargeable Battery Pack
This long life battery pack must be recharged when it fails to produce sufficient power on jobs which were easily done before.
At the end of its technical life, discard it with due care for our environment:
• Run the Battery pack down completely, then remove it from the tool.
• Li-Ion cells are recyclable. Take them to your dealer or a local recycling station. The collected battery packs will be recycled or
disposed of properly.
After-sales service
- For any question or intervention in the machine, call your FACOM distributor.
Guarantee
Facom power tools are guaranteed for 24 months from the date of purchase against any defect or manufacturing fault.
Facom accessories and wear parts, charger and batteries are covered by the legally enforced guarantee.
This guarantee does not cover the following cases: normal wear, non compliance of instructions of use and safety guidelines, non-conventional
or abusiveuse of the tool, tool overloading, lack of servicing or maintenance, intrusion of foreign bodies, tools which have been disassembled
or modified, or featuring traces of shock (dents, cracks or broken covers...), use with poor quality or non compatible accessories.
To use the guarantee, provide: the tool with its serial number as well as the legible and unmarked original invoice designating the product
and its date of purchase.
Detailed conditions of application of the guarantee: call your distributor.
WE, FACOM S.A.S., 6/8 RUE GUSTAVE EIFFEL - BP 99 - 91 423 MORANGIS CEDEX FRANCE, STATE UNDER OUR LIABILITY THAT THE FOLLOWING PRODUCTS:
CL3.C18S – 18V Impact wrench kit 1/2'' BY FACOM
- IS IN CONFORMITY WITH THE «MACHINERY» DIRECTIVE 2006/42/CE, EN60745-1:2009 +A11:2010, EN60745-2-2:2010
- AND COMPLY WITH DIRECTIVE 2004/108/EC (until19.04.2016); 2014/30/EU (from 20.04.2016); 2011/65/EU
NU-CL3.C18S_0216.indd 25
EC-DECLARATION OF CONFORMITY
25
20.02.2016
The FACOM Quality Manager
2/26/2016 9:06:12 AM