Maintenance And Cleaning; Disposal - Conrad BASETech 1486608 Mode D'emploi Original

10. Maintenance and Cleaning

• The product has no parts that require maintenance by you. Therefore, never open/disas-
semble it. Maintenance or repair and opening of the product in this context must only be
performed by a specialist or suitable specialist workshop.
• Before maintenance or cleaning, switch off the cordless screwdriver. Wait until the drive has
stopped completely. Put the rotating direction switch (5) into the middle position to activate
the activation lock.
• Careful cleaning maintains the product's function to give you joy in using it for a long time. A
good craftsman takes care of his tools!
• Remove dust with a clean long-haired brush and a vacuum cleaner. Dust may also be re-
moved with compressed air.
• A dry, clean and lint-free cloth is sufficient for cleaning the outside of the product.
Do not use any aggressive cleaning agents or chemicals. Unsuitable cleaning agents
may cause discolourations of the plastic surface or damage the label. Also never use
any abrasives, alcohol, gasoline, spirit or similar liquids for cleaning!
The cordless screwdriver, charger, USB cable or the enclosed bits can be optimally
kept in the enclosed metal box.

11. Disposal

Electronic devices are recyclable and should not be disposed of in household waste.
At the end of its service life, dispose of the product according to the relevant statutory
regulations.
35