Troubleshooting - Conrad BASETech 1486608 Mode D'emploi Original

9. Troubleshooting

By purchasing this cordless screw driver, you have acquired a product designed to the state of
the art and operationally reliable. Nevertheless, problems or errors may occur. The following
contains descriptions for the removal of possible interferences.
Always observe all safety information in these operating instructions!
Problem
No function.
When pushing the on/off
switch, the motor will not
start up.
The cordless screwdriver
and the charger grow hot
during charging.
The motor stops after brief
operation.
34
Solution aid
• The rechargeable battery is discharged. Recharge it.
• The motor is deactivated in the middle position of the ro-
tating direction switch (activation lock). Push the rotating
direction switch out of the middle position.
• The rechargeable battery is discharged. Recharge it.
• The cordless screw driver is being charged. The drive
is deactivated during charging. Wait until the cordless
screwdriver is completely charged.
• This is normal.
• The rechargeable battery is discharged. Recharge it.