Conrad BASETech 1486608 Mode D'emploi Original page 30

• Ensure that no dust or dirt enter the cordless screwdriver (specifically at the USB
charging socket).
• There are different risks of injury depending on the work performed with the cord-
less screwdriver. Depending on work, goggles, a dust mask and hearing protec-
tion must be worn; a safety helmet may also be required (e.g. at work overhead).
• Dusts from various materials may be hazardous to health and may cause allergic
reactions, diseases of the respiratory system or even cancer (e.g. asbestos-con-
taining material - this must only be processed/used by specialists).
• Observe the provisions valid in your country, e.g. on work protection measures.
• Properly hold the cordless screw driver. A sudden stop of the drive will transfer
the torque to the cordless screw driver itself, and it will turn sideways. This poses
the danger of the cordless screw driver falling from your hands, danger of injury!
• Switch off the cordless screwdriver at once when the drive blocks (e.g. when a
screw has been completely turned in).
• Before putting down the cordless screwdriver, wait until the drive has stopped
entirely.
• The cordless screw driver has a bright LED light that is activated automatically
when the on/off switch is activated.
Attention, LED light: Never look into the LED beam! Never watch directly or with
optical instruments! Danger of eye damage!
30