Gima 25591 Manuel De L'utilisateur page 10

• Press the "Mode" button a second time "F-2" shown to set the alarm temper-
ature limit. Press the + or - buttons to change the value.
The mode is applied to Body Temp
• Press the "Mode" button a third time "F-3" shown to set the °C/°F temperature
units. The temperature units °C or °F will be shown. Press the + or - buttons to
change the unit.
• Press the "Mode" button a forth time "F-4" shown to set the backlit status.
Press the + or - buttons to switch from ON to OFF.
• Press the "Mode" button a fifth time "F-5" shown to set the laser status.
Press the + or - buttons to switch from ON to OFF.
Notice: Only when the laser head installed.
Mode Function
Setting Deviation
F-1
Value
F-2 Setting Alarm Value
Setting Measurement
F-3
Unit
F-4 Backlit ON/OFF
F-5 Laser setting
Save Save and automatic shut off
Body Temperature Measurements
Please note that the forehead/temples must be free from sweat and cosmetics
and that taking vasoconstrictive medication and skin irritations can distort the
result when measuring temperature on the forehead.
• Press the trigger to switch the meter on with one beeper. The device performs
a brief self test: all elements of the display are shown for approx. 1 second.
Following a successful self test with backlit (Red-Orange-Green).
• Press the "B/O" button for "Body temp" for accurate measurements in the
range of 32.0 to 42.9°C (89.6 to 109.2°F).
• Hold the meter by its handle and point it toward the surface to be measured.
Measurement distance should be <2.5cm (<1 in).
• Press the trigger to take a temperature reading. The temperature reading ap-
pears in the display.
If the F-4 MODE of backlit & "
temperature 38.0°C:
ENGLISH
"+"
Increase
0,1°C
Increase
0,1°C
°F
On
On
"-" Default
Decrease
0°C
0,1°C
Decrease
38.0°C
0,1°C
°C °C
Off On
Off Off
" button voice ON & F-3 MODE set alarm
Remark
Body mode available
Effective Range: ±2°C
Body mode available
Effective Range:
37.0-42.5°C
Only when the laser
head installed
10