Gima 25591 Manuel De L'utilisateur page 8

Introduction
Congratulations on your purchase of our IR Thermometer. This thermometer is
intended for scanning groups of individuals or monitoring an individual for ele-
vated temperatures. Always use a clinical thermometer when high accuracy body
temperature measurements are required
Considerations and Warnings:
• Read all instructions before using this product.
• For the most accurate results, make reading with an ambient (room)
temperature of 10 to 40°C (50 to 104°F).
• Make sure the skin is dry and that no hair interferes with the measurement.
• Do not immerse the thermometer in water.
• Avoid touching and/or scratching the infrared sensor lens.
• Always use a clinical thermometer to verify any abnormal temperature meas-
urements.
• Clean the lens area by gently blowing with compressed air and use a damp
swab to wipe the lens. Do not use any solvents to clean the lens.
Measurement Notes
• If the meter has been stored in a cold or hot environment, allow it at least 30
minutes to acclimate to room temperature before making measurements.
• To prevent transmission of disease, avoid direct contact with the skin.
• After heavy exercise always wait at least 10 minutes before taking forehead
temperature readings.
Storage and maintenance
• Clean the sensor tip after each use. Use a clean cloth or cotton bud that can be
moistened with disinfectant, alcohol or warm water.
• To clean the entire device, please use a soft cloth slightly moistened with a mild
soapy solution.
• Do not use any harsh cleaning products.
• If prolonged storage is intended, you should remove the battery.
• The device must not be stored or used at an excessively high or low tempera-
ture or humidity (see technical data), in sunlight, in association with an electrical
current or in dusty locations. Otherwise inaccuracies can occur.
ENGLISH 8