Gima 25591 Manuel De L'utilisateur page 9

9
Thermometer Description
Thermometer Description
1. IR sensor
2. LCD display
3. Body/Object & "-" button
4. Voice On/Off & "+" button
5. Memory/Setting mode button
6. Measurement trigger
7. Handle
8. Battery compartment
Display Description
1. Memory/Memory space number
2. Object temperature Mode
3. Body temperature Mode
4. Voice status
5. Low battery icon
6. Measurement unit
7. Temperature
Operation Instructions
Temperature Mode settings
• With the meter ON, press "Mode" button, for three seconds until to "F-1"
shown to enter the long term calibration drift correction mode. On entering the
mode, the previous temperature correction factor will appear on the display. To
make a correction, measure a known, fixed temperature source. Enter the cor-
rection mode and press the + or - buttons to change the correction value and
minimize the difference in readings. Repeat and adjust the correction value as
needed until the measurement on the meter matches the known temperature.
The mode is applied to Body Temp.
2
3
5
1
2
3
ENGLISH
5
1
4
6
7
8
4
6
7