Stanley SCS-46 JET Traduction Des Instructions Originales page 17

Fit the air filter cover again.
Chain lubrication
the fuel can be checked through the sight glass on the
fuel tank.
Important: please fill up the oil tank before refueling the
fuel tank every time.
Technical data
Air-cooled 2-stroke engine SPS1E43F3
Displacement:
Max. engine power:
Fuel tank capacity:
Oil tank capacity:
Cutting length:
Spark plug:
L8RTF(NHSP LD); L8RTC (Torch) ;L8RTF(BOSCH)
Weight ( Without guide bar and chain, empty tank):5,6 kg
Sound pressure level(L ):
PA
Sound power lever(L ):
WA
Vibration:
Max. front handle:
Max. rear handle
Length max. Bar:
Chain pitch:
Template chain:
Sprocket:
Engine idling speed range::
Maximum speed:
Chain Type:
Guide Bar Type: Oregon 160SDEA095 (for 16 ")
The operating noise level may exceed 113 dB.
Repairs
Use only the accessory and spare parts recommended by
the manufacturer. If the machine suers a failure despite
our quality controls and your care, have repair work
carried out only by a trained electrician.
3
45,1 cm
1,8 kW
3
500 cm
3
240 cm
360 mm
102,78 dB(A), K=2,5 dB(A)
110,07 dB(A), K=2,5 dB(A)
2 2
5.650 m/s , K=1.5 m/s
2 2
6.027 m/s , K=1.5 m/s
16''
9,525 mm
1,27 mm (0,05")
7 Teeth X 9,525 mm
-1
2700-3400 min
-1
11000 min
Oregon 91P055X (for 16 ")
17
Environmental protection
Do not simply dispose of the machine,
accessories and packaging in the dustbin, but
ensure that it can be recycled. A small
amount of effort on your part can do a great
deal of good for our environment.
Residual risks
Even when properly used in the tool is always some
residual risk that can not be excluded. From the nature
and design of the tool, the following potential hazards
can be derived :
- Contact with the unprotected chain ( cuts);
- Reaching into the running saw chain (cut injury);
- Unexpected , sudden movement of the guide rail ( cuts);
- Ejection of parts of the chain;
- Ejection of parts of the material to be cut;
- Impairment of hearing , if there is no prescribed hearing
protection is worn;
- Inhalation of of material to be cut;
- Risk of kickback;
- This device produces an electromagnetic field during
operation ! This field can interfere with active or passive
medical implants under certain circumstances!
To reduce the risk of serious or fatal injury , we
recommend persons with medical implants their
physician and the manufacturer of the medical implant
consulted before the instrument is used !
G
B