EcoFlow RIVER 2 Pro Manuel D'utilisation page 13

Additional Features
X-Boost
The product supports X-Boost. It can power devices rated at up to 1600W without
incurring operation failure due to overload protection. Observe the following tips when
using the X-Boost feature:
1. The X-Boost feature is not suitable for appliances with voltage protection
(such as precise instruments).
2. It is suitable for heating and motor devices. Please conduct your own tests to check whether
your devices support X-Boost.
EPS
The product supports emergency power supply (EPS). When you connect the grid power to the
AC input port of the product through an AC cable, you can power electrical devices through the
AC output port (AC power will come from the grid instead of the power station in this situation).
In case of a sudden blackout, the product can automatically switch to the battery-powered
supply mode within 30ms.
As a basic UPS feature, the EPS does not support 0ms switching. Please do not connect
the product to any device that requires 0ms UPS (such as data servers and workstations).
Please test and confirm the compatibility before using the product. We recommend that you
charge only one device (with maximum power <1000W and AC input ≥110V) at a time and
do not use multiple ones at the same time to avoid triggering overload protection. EcoFlow
takes no responsibilities for any device failure or data loss caused by failure to follow
instructions.
10