EcoFlow RIVER 2 Pro Manuel D'utilisation page 10

Power On/Off
Press the main power button once to turn on the product, then the LCD screen lights up and
the main power indicator becomes breathing white; press and hold the main power button
(for about 3 seconds) to turn off the product, meanwhile, the LCD screen also goes off.
1. After the product is turned on, press the main power button once to turn off the
LCD screen.
2. If the product is not used for 5 minutes, it will enter hibernation state with the LCD
screen gone off.
3. When RIVER 2 Pro is charging, it can't be turned off by pressing and holding the
main power button unless the charging cable is unplugged first.
Charge Your Devices
The USB-A and USB-C output ports are automatically turned on once the product is turned on.
Press the "DC output switch" or "AC output switch" once to turn on their corresponding DC/AC
output sockets; press again to turn them off.
Short press the
power switch
When using the AC output socket, make sure that the sum power of all loaded devices
is less than the rated power.
Short press for power-on/
Long press for power-off
Short press the
power switch
7