OPERATING YOUR WASHER
Adding liquid chlorine bleach
Use your washer's liquid chlorine bleach
dispenser to add bleach to the wash load.
Always measure liquid chlorine bleach. Do
not guess. Never use more than 1 cup
(250 mL) for a full load. Use less with lower
water level settings. Follow manufacturer's
directions for safe use. Use a cup with a
pouring spout to avoid spilling.
1.
Load the washer.
2.
Pour measured chlorine bleach carefully
into the dispenser. Do not let bleach
splash, drip, or run down into washer
basket. Undiluted bleach will damage
any fabric it touches.
3.
Start the washer. Bleach will be diluted
automatically during wash part of cycle.
NOTE:
Do not use this dispenser to add
powdered chlorine or color safe bleach to
your wash load. The dispenser is for liquid
chlorine bleach use only.
Adding liquid fabric softener
(ONLY when using Normal – Traditional Deep Rinse cycles)
NOTE:
DO NOT use liquid fabric softener
when you are using the Water Saving
Spray Rinse cycles. Use a dryer fabric
softener sheet.
•
Always dilute fabric softener with 1/2 to 1
cup (125 to 250mL) warm water. Undiluted
fabric softener can stain fabrics.
•
Add diluted fabric softener only in the
final rinse.
•
Liquid fabric softener should not be mixed
with other laundry products because
greasy stains may form. If stains form,
remove them by wetting the stain and
rubbing it with liquid detergent or a bar
of soap. Rewash the stained item.
•
Too much fabric softener can make some
items (diapers and towels) nonabsorbent.
If this happens, use less fabric softener or
do not use it every time.
16
All manuals and user guides at all-guides.com