Publicité
Les langues disponibles
Les langues disponibles
PRODUCT ASSEMBLY
3
Place the Bowl on the Clamping Plate
and twist to lock in place.
5
Unlock the Motor Head and move it
down. Then, lock* the head to keep
it down. Before mixing, test lock by
attempting to raise the Motor Head.
*Locking option is available on select models.
4
Slide and rotate the accessory, aligning
over the pin on the shaft.
(OPTIONAL) To adjust Beater to Bowl
Clearance: Tilt back and lock* the
Motor Head. Turn the screw slightly
counterclockwise (left) to raise the
beater, or clockwise (right) to lower it.
NOTE: If you overadjust the screw, the
locking lever may not lock into place.
1
2
7
Publicité
