Publicité
Les langues disponibles
Les langues disponibles
6 Cleaning and maintenance
5. Wash the water tank, dust container and filter assembly periodically with cold water as required as
per the frequency of operation.
6. Leave the water tank, dust container and filter assembly to dry after washing, and ensure that they
are completely dried.
C
Drying may take 24 to 48 hours.
7. Assemble the water tank, dust container and filter assembly after drying them and then install the
assembly to the vacuum cleaner.
A
WARNING: Do not operate the robot vacuum cleaner without installing the filter group.
Otherwise, the appliance may get damaged
6.2 Cleaning of the brush
1. Open the upper cover of the main brush by pressing on the tabs. Pull and remove the main roll up-
wards. Cut the hair lapped on the roller brush with the cutting and sharp side of the cleaning brush.
Then clean the dusts on the roller brush with the bristles of the cleaning brush.
24 / EN
.
Robot Vacuum / User Manual
Publicité
