Beko VRR 83314 VB Mode D'emploi page 15

5 Operation
A. If the operation is paused, press " " button to recharge automatically.
B. If the robot vacuum cleaner is caught up anywhere and cannot find the charging dock, please move
the robot vacuum cleaner to the charging station yourself to allow it to be charged.
Point cleaning
Bring the robot vacuum cleaner to the area to be cleaned and press " " button
twice. When the mode is activated, the robot vacuum cleaner shall clean a square
area of 1.5 x 1.5 m by considering itself as the center.
• It cannot start the point cleaning operation from the charging dock. When the point cleaning is com-
pleted, it does not return to the charging station and remains in its position. Bring it to the charging
stand or move it to the charging stand by pressing " " button on the upper body.
Vacuum power selection
(Supported with the relevant mobile application only) You may select the desired cleaning power from
the application:
• Quiet
• Standard
• Powerful
• Maximum
Remote controlled cleaning
(Supported with the relevant mobile application only) You may direct the robot vacuum cleaner to the
area to be cleaned by using the manual remote control mode through the application.
Sleep
The robot vacuum cleaner switches to sleep mode automatically if it remains stationary for 10 minutes.
The robot vacuum cleaner switches to sleep mode automatically 10 minutes after it is completely
recharged. The sleep mode deactivates the current task.
Resetting the system
For APP account delete, the customer can press "remove the product and clear the account" button on
the APP to delete all the data on the APP and cloud like maps, clean histories, shared machine, WIFI
account password...etc.
Press " " button for 15 seconds in standby position to reset the system. When the system is reset, the
map and the original settings (including virtual limits) on the robot vacuum cleaner are deleted.
5.3.1 Operation with the application
Robot Vacuum / User Manual
15 / EN