Bosch Quigo Notice Originale page 26

26 | English
Loosen the fastening screw (15) of the holder, position the holder in the desired
location and retighten the fastening screw.
Place the measuring tool with the tripod mount (6) on the 1/4" screw (13) of the
holder and tighten it to secure it on the holder applying moderate force. Do not
tighten the measuring tool firmly as this could cause damage.
Roughly align the holder before switching on the measuring tool. To do this, loosen
the locking screw (14) of the holder and move the measuring tool into a horizontal
position at the desired height. Retighten the locking screw.
You can also mount the measuring tool on the holder using the adapter plate (3).
Working with the Tripod (Accessory)
A tripod offers a stable, height-adjustable support surface for measuring. Place the
measuring tool with the 1/4" tripod mount (6) on the thread of the tripod (11) or a
conventional camera tripod. Tighten the measuring tool using the locking screw of
the tripod.
Roughly align the tripod before switching on the measuring tool.
You can also mount the measuring tool on the tripod using the adapter plate (3).
Working with the adapter plate (see figures B–C)
The adapter plate (3) makes it easier to accurately align the measuring tool with a
reference point and enables you to quickly attach and detach the measuring tool.
The adapter plate (3) can be mounted on the holder (16) or tripod (11).
– Holder: Place the adapter plate with the 1/4" mount (1) on the screw (13) of the
holder and tighten it to secure it on the holder applying moderate force.
Note: Loosen the locking screw (14) of the holder if you want to change the posi-
tion of the measuring tool. If the adapter plate is turned without loosening the
locking screw, the adapter plate can become loose and the measuring tool can
fall off.
– Tripod: Tighten the locking screw of the tripod in the 1/4" mount (1) of the ad-
apter plate.
1 609 92A 4J2 | (10.08.2018) Bosch Power Tools