Bosch B36CD Serie Manuel D'utilisation page 19

Bottle fill option
You can dispense a specific amount of water with the bot-
tle fill option.
Note: The factory-set amount of water is approx. 17 fl oz
(0.5 l).
Filling a bottle
Press .
1.
Place a bottle or jug under the dispenser opening.
2.
Press .
3.
a The set amount of water is dispensed.
Tips
¡ To stop dispensing early, press any touch field on the
control panel (ice and water dispenser).
¡ To start dispensing again, press
Note: If you do not fill a bottle for some time, the selection
option changes to
Setting the amount of water for the bottle fill option
Note: The maximum fill time is 60 seconds.
Press .
1.
Place a bottle or jug under the dispenser opening.
2.
Press and hold
3.
until the desired amount of water is dispensed.
The light bar flashes during dispensing.
a This new amount of water is saved and will be dis-
pensed for the bottle fill option.
Button lock (childproof lock)
The button lock prevents the ice and water dispenser from
being operated accidentally or incorrectly while running.
Note: Ice cube production continues whilst the button lock
is active.
Switching on the button lock
Press and hold until the light bar lights up fully.
▶
lights up.
a
Switching off the button lock
Press and hold until the light bar lights up fully.
▶
a The option that was last used lights up.
Permanent light
If you do not dispense ice or water for some time, the light
switches itself off.
.
.
+ at the same time
You can permanently switch on the light on the ice and
water dispenser.
Switching on the permanent light
Press .
▶
lights up.
a
Switching off the permanent light
Press .
▶
goes out.
a
Switching on ice cube production
Press and hold +
▶
light bar lights up fully.
a Ice cube production starts and the selection option that
was last used lights up.
Switching off ice cube production
Press and hold +
▶
light bar lights up fully.
a The ice dispenser and ice cube production stop.
14 Defrosting Defrosting
Defrosting
14.1 Defrosting in the refrigerator compart-
ment
The refrigerator compartment in your appliance defrosts
automatically.
14.2 Defrosting in the freezer compartment
The fully automatic NoFrost system ensures that the
freezer compartment remains frost-free. Defrosting is not
required.
Cleaning and maintenance 15 Cleaning and maintenance
To keep your appliance working efficiently for a long time,
Cleaning and maintenance
it is important to clean and maintain it carefully.
Customer Service must clean inaccessible points. Clean-
ing by Customer Service can give rise to costs.
15.1 Preparing the appliance for cleaning
Switch off the appliance. → Page 13
1.
Disconnect the appliance from the power supply.
2.
Unplug the appliance from the power source or switch
off the circuit breaker in the fuse box.
Take out all of the food and store it in a cool place.
3.
Place ice packs (if available) onto the food.
Remove all fittings and accessories from the appliance.
4.
→ Page 20
Remove the telescopic rails. → Page 22
5.
Remove the shelf above the fruit and vegetable con-
6.
tainer. → Page 23
Remove the shelf above the storage container.
7.
→ Page 23
Remove the fruit and vegetable container cover.
8.
→ Page 23
Defrosting en-us
at the same time until the
at the same time until the
19