Electrolux EUN12510 Notice D'utilisation page 34

34 electrolux
5. Remove the correct part from the hinge
cover (E). Make sure to remove the part
DX, in the case of right hinge, SX in op-
posite case.
6. Attach the covers (C, D) to the lugs and
the hinge holes.
Attach the hinge covers (E) to the hinge.
C
D
E
7. Disconnect the parts (Ha), (Hb), (Hc) and
(Hd).
All manuals and user guides at all-guides.com
E
Ha
Hc
8. Install the part (Ha) on the inner side of
the kitchen furniture.
ca. 50 mm
ca. 50 mm
9. Push the part (Hc) on the part (Ha).
Ha
Hc
10. Open the appliance door and the kitchen
furniture door at an angle of 90°.
Insert the small square (Hb) into guide
(Ha).
Hb
Hd
90°
21 mm
90°
21 mm