GYS AIRFIX DRAW ALIGNER Mode D'emploi page 11

Operating manual
PULLING CAPACITY
The Airfix Draw Aligner is designed to pull up to 350kg across its full height with a manual rope winch. The cord has a
tensile strength limit of 1.5 T.
UNPACKING AND UNLOADING
The packaging contains the user and maintenance manual for the unit. On delivery, check for external transport da-
mage. If there is visible damage, leave the goods and packaging as is. Do not use the goods, and contact your dealer
directly. Failing that, a statement of reservation must be made to the carrier. Under no circumstances can GYS be held
responsible. Wear gloves and safety shoes. The weight of the goods is 31 kg. Packaging should not be put in a waste
bin, but should be recycled.
Translation of the original
instructions
AIRFIX DRAW ALIGNER
11