GYS AIRFIX DRAW ALIGNER Mode D'emploi page 10

Operating manual
GENERAL INSTRUCTIONS
This user's manual includes operating instructions for your device and safety warnings for your
protection. Please read it carefully before first use and keep it for future reference. Do not use this
machine if any parts are missing or damaged. This product must not be modified, in any way what-
soever. Fixings that are over- or under-tightened are susceptible to breakage, loosening, or spara-
tion, which can lead to serious accidents.
Unsecured objects can become projectiles. Assemblies that require a specific torque should be
checked with a torque gauge. If the markings indicating the nominal load, operating pressure or the
warning labels are illegible or missing, they must be replaced. Both operators and maintenance staff
must be physically capable of carrying the load, load and power of the connected equipment, and
must be able to perform the task. The use of this unit is restricted to professionals.
PERSONAL SAFETY
To protect yourself and others, ensure the following safety precautions are taken:
Wear safety shoes in order to avoid an injury if a part is dropped during operation or assembly.
Wear protective gloves to reduce the risk of cut injuries during
assembly and use of the equipment.
The operator should be positioned in such a way as to have access to the winch crank while
working.
Do not stand directly in front of the post.
WORKING ENVIRONMENT
Slips, trips and falls are a major cause of serious injury and death. Beware of loose cables on the floor. Always use the
tool at a safe distance from people and objects in or around the work area. The Airfix Draw Aligner is intended for use
indoors in a well-lit environment, on a flat and smooth floor.
LIMITATIONS OF LIABILITY
The Airfix Draw Aligner is an automotive body straightening tool designed to comply with all relevant standards. All
data and advice given in this manual have been compiled taking into account the applicable standards and regula-
tions, as well as our own extensive knowledge and experience.
The Airfix Draw Aligner is not suitable for repairs and straightening of structural vehicle parts.
The manufacturer cannot be held responsible in case of material and physical damage that could lead to
death by:
• Non-compliance with the operating instructions
• Improper or dangerous use
• Employment of unqualified and/or unauthorised persons
• Unauthorised alteration of the unit or its accessories
• Insufficient maintenance
DESCRIPTION AIRFIX DRAW ALIGNER
The Airfix Draw Aligner is intended to be used for the straightening of panelling. Self-stabilising via an air vacuum
anchoring system, it allows the user to work at a more comfortable height without having to bend down. Portable and
easy to assemble, it enables fast straightening of automotive body panels.
The winch position can be adjusted easily.
10
Translation of the original
instructions
AIRFIX DRAW ALIGNER