Makita RM01 Manuel D'instructions page 5

General Specification
Applicable Battery Type
Operating Voltage
Current Consumption
Cut Off Voltage
(Low Voltage Protection)
Tuning Frequency Range
FM Usable Sensitivity
(30 dB S/N)
AM Usable Sensitivity
(20 dB S/N)
No. of Preset Memory
Speaker Output Power per channel
Earphone Output Power per channel
AUX Input
AM Antenna
FM Telescopic Antenna
Speaker
LCD Display
LCD Backlight
Applicable Environment
Dimensions
FUNCTIONAL DESCRIPTION
Installing or removing battery cartridge
(Fig. 2)
• To remove the battery cartridge, withdraw it from the
Cordless Radio while pressing the buttons on both
sides of the cartridge.
• To insert the battery cartridge, hold it so that the battery
cartridge front shape fits to that of the battery
installment opening and slip it into place.
Always insert it all the way until it locks in place with a
little click. If not, it may accidentally fall out of the
Cordless Radio, causing injury to you or someone
around you.
• Do not use force when inserting the battery cartridge. If
the cartridge does not slide in easily, it is not being
inserted correctly.
Hook (Fig. 3)
The hook is convenient for hanging the Cordless Radio
temporarily.
All manuals and user guides at all-guides.com
Item Standard
BL1013
8 to 12 Vdc
450 mA max
7.9 ± 0.4 V
530 to 1710 KHz
AM
10 KHz Step
87.5 to 108 MHz
FM
100 KHz Step
20 dBµV
62 dBµV
AM
FM
1.2 W max
20 mW max
Impedance 22 K ohm 150 mVrms (L&R channel)
Ferrite bar ø8 x 100 mm
(L) 340 mm
(fully extended)
ø31 mm 16 ohm 1.5 W, 2 pieces
TN type, view area 45 x 20 mm
White color LED; light up for 20 seconds if any keys is
pressed or tuning knob is tuned
Indoor use
(L) 169 x (W) 83 x (H) 74 mm
OPERATION
HOW TO LISTEN RADIO BROADCASTING
1. Press POWER (9) button to switch on the radio unit.
(Fig. 1 & 5) The receiving frequency is showed on
LCD DISPLAY (15). (Fig. 1 & 4)
2. Press BAND (18) button to select FM or AM band.
(Fig. 1)
3. For FM broadcasting listening, extract out the
TELESCOPIC ANTENNA (8) fully and rotate the
direction of it to have a better performance of
reception. For AM broadcasting listening, as the AM
antenna is built-in the radio, rotate the direction of
radio unit to get a better performance of reception.
(Fig. 1 & 6)
4. For manual tuning, press SEARCH UP (16) or
SEARCH DOWN (17) button once to tune up or tune
down the receiving frequency by one step, or rotate
the TUNING KNOB (10) to have a faster tune up/
down. (Fig. 1 & 5)
5. For automatic tuning, press and hold the SEARCH UP
(16) or SEARCH DOWN (17) button for 3 seconds,
the receiving frequency increases or decreases by
one step automatically. When broadcasting is
received, the searching stops 5 seconds for short
listening and then restart searching. If you want to
5
5
5