Preface; Safety; Classification Of Important Information; Description - Nederman 893 Manuel De L'utilisateur

1 Preface
EN
Thank you for using a Nederman product!
The Nederman Group is a world-leading supplier and
developer of products and solutions for the environ-
mental technology sector. Our innovative products
will filter, clean and recycle in the most demanding of
environments. Nederman's products and solutions will
help you improve your productivity, reduce costs and
also reduce the impact on the environment from in-
dustrial processes.
Read all product documentation and the product iden-
tification plate carefully before installation, use, and
service of this product. Replace documentation imme-
diately if lost. Nederman reserves the right, without
previous notice, to modify and improve its products
including documentation.
This product is designed to meet the requirements
of relevant EC directives. To maintain this status, all
installation, maintenance, and repair is to be done
by qualified personnel using only Nederman original
spare parts and accessories. Contact the nearest au-
thorized distributor or Nederman for advice on tech-
nical service and obtaining spare parts. If there are
any damaged or missing parts when the product is de-
livered, notify the carrier and the local Nederman rep-
resentative immediately.
2 Safety
2.1 Classification of important informa-
tion
This document contains important information that
is presented either as a warning, caution or note, ac-
cording to the following examples:
WARNING! Risk of personal injury
Warnings indicate a potential hazard to the
health and safety of personnel, and how that
hazard may be avoided.
CAUTION! Risk of equipment damage
Cautions indicate a potential hazard to the
product but not to personnel, and how that
hazard may be avoided.
Notes contain other information that is import-
ant for personnel.
3 Description
3.1 Technical specifications
3.1.1 Dimensions
See Figure 1(A).
3.1.2 Technical data
See Figure 1(B).
12
Hose Reel 893
Item
Weight, with hose
Ambient temp
Material recycling
Check maximum working pressure (MPa) on the
identification label of the reel.
4 Installation
4.1 Delivery check
If there are any damaged or missing parts when the
product is delivered, notify the carrier and the local
Nederman representative immediately.
4.2 Mounting instruction
The reel can be wall, floor or ceiling mounted, see
ure 2. Maximum installation height above floor level
is 4 m, see Figure 3. Select a level surface on which
to mount the reel, and use the template on the side
of the packing to mark the holes. Use suitable fixing
bolts and make sure that they are secure. The bolts
must be able to withstand a minimum torque force of
3800 N.
When choosing mounting place, note that the life
span of the hose reel can be reduced by the influence
of chemicals and strong UV or heat radiation.
4.3 Hose outlet
See Figure 4. The hose outlet can be fitted in two po-
sitions. Choose the position where the hose is bent as
little as possible.
4.4 Connection to the pipework system
See Figure 4. The reel must be connected to the pipe-
work system with hose only, minimum 1,0 m. The inlet
hose should go through the ring fitted on the tubular
stand. Check that the hose is not twisted or strained
after connection. A stop valve should be fitted on the
pipe system before the hose connection.
4.5 Ratchet mechanism
The Hose Reel Series 893 is delivered with a ratchet
mechanism which retains the hose in the required
outdrawn position, see Figure 5. The ratchet will dis-
engage if the hose is drawn out a little further and the
hose then recoils to the drum. It is to be noted that the
hose is to be held by the hand as long as possible dur-
ing the recoiling.
The ratchet function can be disengaged by remov-
ing the ratchet. In that case, the hose must first have
completely recoiled.

Description

12-18 kg
-10 °C - +60 °C
78-99 weight-%
Fig-