Publicité
Les langues disponibles
Les langues disponibles
ENGLISH
•
The kettle body must match with the kettle base.
This appliance is intended to be used in household and similar
such as:
- Staff kitchen in shops, offices and other working envi-
ronments;
- Farm houses;
- By clients in hotels, motels and other residential places;
- Bed and breakfast type of environments
•
Avoid touching the surface of the hot kettle and until it cools
down for a few minutes. Use the handle and knobs.
•
To avoid possible steam damage, do not face the spout when
operating the kettle.
•
Use a protective pad to prevent damage if used in wood fur-
niture.
•
To avoid scalding, always ensure the lid is correctly positio-
ned before operation.
•
Scalding may occur if the lid is removed while heating.
•
Remove and replace the lid carefully when hot.
WARNING: you must be extremely cautious when moving the
kettle containing hot water. Never lift the kettle by its lid. Always
use the body handle.
•
Never switch on your kettle when its empty.
•
Do not use the base unit for other purposes.
•
To avoid the steam scalding your hands, do not open the lid
while water is boiling or in the short time before and after.
3. BEFORE USE
Before using the product for the first time, boil water twice without cleaning agents and then throw water
away.
•
The kettle should always be unplugged when filling or adding water.
•
Fill the kettle with water to the desired level. Do not exceed the max. mark. Use the water level indicator.
You can fill via the spout or opening the lid.
12
THERMOSENSE 370 CLEAR
All manuals and user guides at all-guides.com
WARNING: do not forget to close the lid properly after filling the kettle with water, otherwise it will not stop
automatically after operating.
•
•
•
•
•
•
•
4. OPERATION
•
•
•
•
5. CLEANING AND MAINTENANCE
Always disconnect the plug from the mains supply before cleaning the machine!
•
•
•
•
6. TECHNICAL SPECIFICATIONS
Item number: 01511
Model: ThermoSense 370 Clear
900-1100 W, 220-240 V, 50/60 Hz
Capacity: 1.7 L
Made in China | Designed in Spain
Do not fill with less than 0.5 L of water. Always from the MIN. mark to prevent the kettle running dry
while operating.
Do not fill it over 1.7 L of water. Always to the MAX. indicator.
An automatic safety system has been installed for protection against overheating. It will be efficient if
the kettle is switched on with insufficient water. If the safety system activates, disconnect the kettle
from the power outlet and allow the kettle to cool down for 5 or 10 minutes. Refill it and it will work
normally.
After boiling the machine switches off automatically.
Disconnect the kettle from the power supply.
Do not open the lid when pouring.
If the kettle is overfilled, boiling water may be ejected.
Place the jar on the base.
Press the switch on the handle, a light will turn on and the product will start operating.
While water is boiling, the indicator light will turn off and beep. The product will turn off automatically.
Unplug the product from the power outlet when you have finished using it.
The exterior of the jar can be cleaned with a slightly dampened cloth. Do not use abrasive scouring pads
or powders.
Never immerse the kettle in water or other liquids.
The calc filter can be removed for cleaning when the water cools down.
In case the water used has caused minerals to build up, such as calc, it is suggested to fill half the kettle
with water and lemon juice and boil it. If impurities are still left after this, repeat the process and allow it
to cool down before emptying and rinsing it.
ENGLISH
THERMOSENSE 370 CLEAR
13
Publicité
