Beko HNT 61311 X Mode D'emploi page 13

Cleaning and maintenance
4
• Install the new carbon filter.
• Install the grease filter.
CAUTION
• Carbon filter shall never be
washed.
A
• Replace carbon filters once
every 3 months.
• You can obtain the carbon
filter from the authorized
services.
Installation of appliance
5
A
WARNING: Before starting the
installation, read the safety
information on user manual.
WARNING: Failure to install
B with screws and stabilizers
in accordance with these ins-
tructions may result in elect-
ric shock.
C
Please refer to page 133 for
the installation guide.
For the installation of the hood, please
contact the nearest Authorized Service.
It is the customer's responsibility to pre-
pare the location and electrical installati-
on of the hood.
5.1 Position of the appliance
• Distance between the cooker and the
cooker hood must be considered prior to
assembly. This distance should be 65 cm.
• Distance must be measured from the
surface of grate for gas cookers, from
surface of glass for electric cookers.
Cooker Hood / User Manual
5.2 Installation of the hood
A
CAUTION: Use protective glo-
ves and goggles for drilling
and cutting operations.
• Wall must be flat, straight and have the
sufficient bearing capacity.
• Depth of drilling holes must comply
with the length of bolts.
• The bolts and dowels provided are su-
itable for brick walls. For other cons-
truction material (e.g. drywall, plate,
porous concrete), suitable fixing do-
wels and nuts shall be used.
13 / EN