Beko HNT 61311 X Mode D'emploi page 10

Using the appliance
3
3.1 Controlling the appliance
Activates the 2nd and 3rd speed
}
levels.
I Press button "I" to operate at 1st
speed level.
When you turn it to the " " position,
the device turns off. At the same
time, the device turns off when the
slide panel is closed.
II Press button "II" to operate at 2nd
speed level.
III Press button "III" to operate in 3rd
speed level.
3.3 Operating the hood
• Your appliance contains a motor that
has various speeds.
• For better performance, we recommend
using low speeds under normal conditi-
ons and high speeds in cases of strong
odours and intense vapour.
• You can start your appliance by pres-
sing on the desired speed setting but-
ton. (I, II, III)
• When the slider panel is opened, the
lamp lights up, when the slider is clo-
sed, the lamp goes out.
3.2 Energy efficient usage
• When using your appliance, adjust the
speed settings according to vapour and
odour intensity, in order to save energy.
• Use low speeds (I-II) under normal con-
ditions, and high speed (III) for intense
10 / EN
odour and vapour.
• The lamps on the hood are placed for
illuminating the cooking area.
• Using them for environmental lighting
shall cause unnecessary energy expen-
diture and insufficient lighting.
• For your device to consume less
energy, run it at a low speed level.
• Your device will reduce energy con-
sumption as it will run more efficiently
when you provide sufficient air intake
to it.
• Set your device to the intense suction
power level before the formation of
steam, in cases where you know that
the dense steam will occur. So, you
reduce energy consumption by using
your device for a shorter time as it will
have a sufficient air intake.
• Keep the lids of the cookware closed to
reduce the steam evolving.
3.4 Replacement of lamp
Remove the aluminium cartridge filter.
Remove the defective bulb and replace
with a new one with the same rating.
Cooker Hood / User Manual