1
2
2
Door lock assembly procedure:
1 - Place the door lock (A) on the breaker shoulder.
2 - Be careful that the lever pin (B) is correctly positioned into the door lock slide (A1).
3 - Be careful that the lever (C) is correctly positioned under the door lock lever (A2).
4 - Insert and tighten cap screw with CH5 torque tool.
DIR 1000650R0610 Version 00
1 - Remove old door lock interlock (if present)
2 - Remove red lever handle (if present)
3 - Install new lever (if not already present)
2
3
1
B
(2)
1
C
A
4
4
A1
A2
8 Nm
dia.
LENGTH
28 mm (1.1")
M6
70,8 lb in
3
CH5