Points to note:
Never exceed the maximum
capacities stated – you may
overload the machine.
Some movement of the mixer
head is normal when mixing heavy
loads such as bread dough.
If the mixer head is raised during
operation, the machine will
continue to operate. Always switch
off before raising the head.
The machine will not operate
unless all the outlet covers are
correctly fitted.
If you hear the machine labouring
either switch off and remove some
of the mixture or increase the
speed.
Your mixer has been fitted with
a 'soft start' feature to minimise
spillage. However if the machine is
switched on with a heavy mixture
in the bowl such as bread dough,
you may notice that the mixer
takes a few seconds to reach the
selected speed.
Always remove attachments fitted
to the outlets before raising the
mixer head.
Using the Drive Outlets
High Speed Outlet
Lift off the high speed outlet cover
Ensure the medium outlet cover is
in place otherwise the appliance will
not operate.
Medium Speed Outlet
Lift off the medium speed outlet
cover
.
Ensure the high speed outlet cover is
in place otherwise the appliance will
not operate.
attachments
.
attachments
To Use your Attachments
Refer to the relevant illustrations for
each attachment and see hint and tips
under each attachment section.
Plastic Blender
15
a
Blade unit
b
Sealing ring
c
Goblet
d
Filler cap
e
Lid
Glass Blender
16
a
Blade holder
b
Blade unit
c
Sealing ring
d
Goblet
e
Lid
f
Filler cap
Assemble the Blender as shown In
illustration
15
and
Note: ensure the sealing ring is fitted
correctly or leaking will occur.
Lid Fitting
Plastic blender – turn clockwise to
15
lock.
Glass blender – push down to secure.
16
Hints and Tips
Do not process hot ingredients
When making mayonnaise, put
all the ingredients, except the oil,
into the blender. Then, with the
machine running, remove the filler
cap and add the oil slowly and
evenly.
Thick mixtures, e.g. pates and dips,
may need scraping down. If the
mixture is difficult to process, add
more liquid.
To blend dry ingredients - cut into
pieces, remove the filler cap, then
with the appliance running, drop
the pieces down one by one.
8
16