Publicité
Les langues disponibles
Les langues disponibles
Gas Connection Requirements
This grill is equipped for use with a 9 kg (20 lb) LP gas fuel
tank (fuel tank not supplied). A gas pressure regulator/hose
assembly is supplied.
A
A.
Gas pressure regulator/hose assembly
Any brand of 9 kg (20 lb) LP gas fuel tank is acceptable for use
with the grill, provided that it is compatible with the grill's
retention means (tank tray included).
It is also design-certified by CSA International for local LP gas
supply or for Natural gas with appropriate conversion.
9 kg (20 lb) LP Gas Fuel Tank
The 9 kg (20 lb) LP gas fuel tank must be mounted and
secured.
1.
Loosen the tank tray locking screw.
2.
Place the 9 kg (20 lb) LP gas fuel tank bottom collar into
the mounting hole in the tank tray.
3.
Tighten the locking screw against the bottom collar of the 9
kg (20 lb) LP gas fuel tank to secure.
A
A.
Locking screw
B.
Tank tray
C.
9 kg (20 lb) LP gas fuel tank tray
LP Gas Conversion Using a Local LP Gas Supply
If you want to convert to local LP gas supply, contact your local
gas company for specific instructions.
Natural Gas Conversion
Conversion must be made by a qualified gas technician. The
qualified Natural gas technician shall provide the Natural gas
supply to the selected grill location in accordance with the
National Fuel Gas Code ANSI Z223.1/NFPA 54 - latest edition,
and local codes. For conversion to Natural gas, the Natural Gas
Conversion Kit supplied with the grill (on some models) or the
Natural Gas Conversion Kit Part Number 710-0003 must be
used. See "Assistance" section for information on ordering.
IMPORTANT: The gas installation must conform with local
codes, or in the absence of local codes, with the National Fuel
Gas Code, ANSI Z223.1/NFPA 54 - latest edition.
Follow instructions for converting to Natural gas in the "Gas
Conversions" section of this manual or the instructions supplied
with Natural Gas Conversion Kit Part Number 710-0003.
The gas supply line shall be equipped with an approved shutoff
valve. This valve should be located in the same area as the grill
and should be in a location that allows ease of opening and
closing. Do not block access to the shutoff valve. The valve is
for turning on or shutting off gas to the grill.
B
C
17
A.
Gas supply line
Shutoff valve "open" position
B.
C.
To grill
Publicité
