Publicité
Les langues disponibles
Les langues disponibles
BATH BOARD
MODEL NO. 9664
Assembly, Installation, and Operating Instructions
SAVE THESE INSTRUCTIONS
NOTE: Check ALL parts for shipping damage. If ship-
ping damage is noted, DO NOT use. Contact Carrier/
Dealer for further instruction.
SAFETY SUMMARY
The following recommendations are made for the safe
use of the Bath Board:
GENERAL WARNINGS
DO NOT install or use this equipment without first read-
ing and understanding this instruction sheet. If you
are unable to understand the Warnings, Cautions or
Instructions, contact a healthcare professional,
dealer or technical personnel before attempting to
install this equipment - otherwise, injury or damage
may occur
Users with limited physical capabilities should be
supervised or assisted when using the Bath Board.
The Bath Board has a weight limitation of 250 lbs.
(114 kg.).
SPECIFIC WARNINGS
The thickness of the inner wall of the bathtub must
be between 1-inch minimum to 2-inch maximum.
DO NOT use the Bath Board with free standing tubs
or tubs that have no inner wall.
Always test to see that the Bath Board is properly
and securely locked in place on bath tub be-
fore using.
Ensure that all hardware is tight at all times.
ASSEMBLING THE BATH BOARD
(FIGURE 1)
NOTE: Refer to SPECIFIC WARNINGS in the SAFETY
SUMMARY in this instruction sheet.
1. Secure the adjustment bracket to the bracket tube
with the clevis pin.
2. Place Bath Board upside down.
3. Position bracket tube assembly in slot on underside
of Bath Board.
4. Place the threaded knob through the hole located
on the end of the Bath Board and attach to the bracket
tube assembly.
All manuals and user guides at all-guides.com
FIGURE 1 - ASSEMBLING THE BATH BOARD
USING THE BATH BAORD
(FIGURE 2)
NOTE: Refer to SPECIFIC WARNINGS in the SAFETY
SUMMARY in this instruction sheet.
1. Ensure the back edge of the Bath Board is flush
2. Securely tighten the threaded knob into the bracket
3. Test to see that the Bath Board is properly and se-
Threaded
Adjustment
2
Adjustment
Bracket
Clevis Pin
Bracket Tube
Assembly
Slot
Threaded Knob
against the bathroom wall.
tube assembly providing a snug fit of the Bath Board
against the bathroom wall.
curely locked in place on bath tub before using.
Bathroom Wall
Bath Board
Knob
Bracket
Bathtub
Inner Wall
FIGURE 2 - USING THE BATH BOARD
Bracket tube
Bath Board
Back Edge
Min 23-1/4-inch
Max 26-1/2-inch
Publicité
