Q&C NANO Guide De L'utilisateur page 8

Maintainence
(filter change)
EN
During everyday use, maintenance is extremely important for hygiene and optimal water quality. This requires two
operations: Regular filter changes and regular descaling and cleaning.
Recommended: If you use our original filtration system, filter life status and notifications about filter change are
available via our app. We suggest you to use the Q&C app for filter cartidges reorder and change and do not use
following manual way. This is necessary to reset the counter in your app!
1. To change the filter without the app, follow the steps
below:
Shut off the filter head valve.
1
2 Twist the old filter cartridge and pull it out.
Insert the new filter cartridge into the filter head and
3
twist to install.
Remove the drip tray and place a large pot under the
4
tap.
16
In-App features: Replacement order & flushing program
4
1
2
3
Filter life: Follow filter recommendations regarding when to change the filter. Our original filtration system lasts
for 6 to 12 months or 5700 liters of water consumption (what sooner reached).
The countdown begins after you flush the filter cartridge and start to use it.
2. Flushing after the filter cartrdige change:
Open filter head valve.
5
Push the ROOM button and dispense 5 liters of water to
6
flush the cartridge.
7 You can now keep using your Nano.
6
5 l
5
EN
17