Adjusting The Brightness; Adjusting The Contrast - Xoro HMD 900 Manuel D'emploi

Selecting digital audio output
•
SPDIF / OFF: switching off digital audio output
•
SPDIF / RAW: please set the audio output to RAW
if you have a Dolby digital 5.1 or DTS cable ampli-
firer .
•
SPDIF /PCJM: please set the audio output to PCM
if you have a 2-channel Dolby digital amplifier
•
Default: SPDIF / PCM
Adjusting the key
When you enter the KEY menu, you can use the
cursor keys ∧/∨ to adjust the desired tone and
press ENTER.

Adjusting the brightness

When you are in Video Setup, you can enter the
Brightness menu and move the cursor keys ∧/∨ to
the desired brightness, then press ENTER.

Adjusting the contrast

When you are un VIDEO SETUP, you can enter the
Contrast menu and move the courser keys ∧/∨ to
the deiered contrast, then press ENTER.
SYSTEM SETUP
29