Publicité
lIpo battery chargIng
The quadcopter is equipped with a LiPo
battery
7.4 V 1-cell 1200 mAh LiPo battery.
Use only the charger supplied to charge the LiPo battery.
Charging:
1. Connect the plug-in wall charger to the socket. (Status LED
turns green)
2. Now connect the battery to the charger. (Status LED turns red
– battery is charging)
3. The battery is fully charged when the status LED turns green
again.
reaDy to Start
Now we're good to go! But before liftoff, make sure that you have read this manual through completely.
1
Push the throttle lever fully down and then switch on the transmitter.
3
Now move the throttle lever completely up and then back down.
Now the quadcopter is ready to launch.
GB // 26
All manuals and user guides at all-guides.com
ON/OFF
Now connect the battery to the quadcopter.
The LEDs on the copter start to flash.
2
Publicité
