Publicité
Les langues disponibles
Les langues disponibles
7 Operation
7.1 Checking the charge status
Briefly press the on/off button (6) to check the charge status of the power bank. The charge
status indicator (5) will turn on. The green LED will turn on and the LEDs will indicate the
charge level:
1 LED on = 0–25 %
2 LEDs on = 25–50 %
If no mobile device is connected for charging, the charge status indicator (5) will switch off
again after a few seconds.
7.2 Charging the power bank
Important:
Do not charge the power bank via a USB 2.0/3.0 port on a computer, as the supplied
power is insufficient and the computer may be damaged.
Proceed as follows to charge the power bank:
1. Disconnect any connected mobile devices from the power bank.
2. Open the protective cover.
3. Connect the USB Type-C
input (4) to a suitable USB power source (max. 20 V/3 A). Use
®
the supplied USB Type-C
cable.
®
The charging time for a complete charge with USB PD at 60 W is approx. 3.3 hours.
Æ
The charge status indicator (1) flashes during charging as follows:
Æ
0–25 %
25–50 %
LED 1
Flashes
Constant
LED 2
Off
Flashes
LED 3
Off
LED 4
Off
LED 5
Lights up green when fast charging is active
4. Disconnect the cable from the power bank and the power source as soon as the power
bank is fully charged.
5. Close the protective cover.
7.3 Charging mobile devices
Important:
– Ensure that the connection specifications for the mobile device match the connection
specifications for the power bank (see "Technical data").
– Always read the operating instructions for the connected device carefully.
– Do not short circuit the inputs/outputs of the power bank.
To charge mobile devices with the power bank, proceed as follows:
1. Disconnect the power bank from the power supply.
2. Open the protective cover.
3. Connect the mobile device you want to charge to the DC 5525 output (1), one of the USB-A
outputs (2), or the USB Type-C
®
charging cable for the mobile device.
The charging process will start automatically.
Æ
The LEDs of the charge status indicator (1) will light up and indicate the current charge
Æ
status of the power bank.
Important:
– To activate the DC 5525 output (1), press the on/off button 2x in sequence.
4. Monitor the charging process. The power bank switches itself off as soon as the mobile
device has finished charging (or the power bank battery is empty).
5. To terminate the charging process manually, disconnect the cable connection between the
power bank and the mobile device.
The power bank will switch off automatically after a few seconds and the LEDs of the
Æ
charge status indicator (5) will switch off.
Note:
– You can use all outputs at the same time and charge up to 4 mobile devices
simultaneously.
7.4 Turning the LED light on/off
Proceed as follows to switch the LED light (7) on and off:
1. Press and hold the on/off button (6).
The LED light (7) will switch on.
Æ
2. Press the on/off button (6) briefly to select the light mode:
– 1x press: flash
– 2x press: SOS signal flash
– 3x press: Steady light
3. To switch off the LED light (7), hold down the on/off button (6) again.
3 LEDs on = 50–75 %
4 LEDs on = 75–100 %
50–75 %
75–99 %
Constant
Constant
Constant
Constant
Off
Flashes
Constant
Off
Off
Flashes
output (4). Use the supplied USB Type-C
8 Cleaning and care
Important:
– Do not use any aggressive cleaning agents, rubbing alcohol or other chemical
solutions. These may damage the housing and can cause the product to malfunction.
– Do not immerse the product in water.
1. Disconnect the product from the power supply.
2. Disconnect all connected cables.
3. Close the protective cover (3).
4. Clean the product with a dry, lint-free cloth.
9 Disposal
This symbol must appear on any electrical and electronic equipment placed on the
EU market. This symbol indicates that this device should not be disposed of as
unsorted municipal waste at the end of its service life.
Owners of WEEE (Waste from Electrical and Electronic Equipment) shall dispose
of it separately from unsorted municipal waste. Spent batteries and accumulators,
which are not enclosed by the WEEE, as well as lamps that can be removed from
the WEEE in a non-destructive manner, must be removed by end users from the
WEEE in a non-destructive manner before it is handed over to a collection point.
Distributors of electrical and electronic equipment are legally obliged to provide free take-back
of waste. Conrad provides the following return options free of charge (more details on our
website):
100 %
in our Conrad offices
Constant
at the Conrad collection points
Constant
at the collection points of public waste management authorities or the collection points set
up by manufacturers or distributors within the meaning of the ElektroG
Constant
End users are responsible for deleting personal data from the WEEE to be disposed of.
Constant
It should be noted that different obligations about the return or recycling of WEEE may apply in
countries outside of Germany.
10 Technical data
10.1 Power supply
Rechargeable battery ................... Li-ion, 30,000 mAh / 111 Wh
Recharge time .............................. approx. 4 hrs via USB Type-C
Input voltage/current ..................... 5/9/12/15/20 V/DC; max. 3 A
Input power ................................... max. 60 W
10.2 Outputs
Output
DC output (DC 5525)
USB Type-C
®
cable or the
®
USB-A (for each output)
USB-C
+ USB1 + USB2 .............. 5 V/DC, 3 A, max. 15 W
®
10.3 Ambient conditions
Operating/storage conditions ........ 0 to +45 ºC, 0–80 % RH
Protection class ............................ IP 66 (with closed protective cover)
10.4 Miscellaneous
Luminous flux of LED light ............ approx. 120 lm
Dimensions (L x W x H) ................ 173 x 95 x 47 mm
Weight .......................................... 820 g
This is a publication by Conrad Electronic SE, Klaus-Conrad-Str. 1, D-92240 Hirschau (www.conrad.com).
All rights including translation reserved. Reproduction by any method (e.g. photocopying, microfilming or capturing in elec-
tronic data processing systems) requires prior written approval from the publisher. Reprinting, also in part, is prohibited.
This publication reflects the technical status at the time of printing.
Copyright 2023 by Conrad Electronic SE.
(20 V / 3 A / PD 65 W),
®
approx. 5 hrs via USB Type-C
(15 V / 3 A / PD 45 W),
®
approx. 10 hrs via USB Type-C
(5 V / 3 A)
®
Voltage
Current
12 V/DC:
max. 2 A
5/9/12/15 V/DC
max. 3 A
20 V/DC (USB PD)
max. 3.25 A
5 V/DC:
max. 3 A
9 V/DC:
max. 2 A
12 V/DC:
max. 1.5 A
*2636968_v2_0823_01_DS_m_4L_(1)
Power
max. 24 W
max. 65 W
max. 18 W
Publicité
