Publicité
Les langues disponibles
Les langues disponibles
Operating instructions
VC PB PD65W
Rugged Outdoor Power Bank, 30,000 mAh
Item no. 2636968
1 Intended use
This product is a portable outdoor power bank. It features a USB-C
enables fast charging and a high output power. The product has an integrated LED light and is
IP66-protected against foreign objects and water splashes when the protective cover is closed.
The product is protected against overheating, overcharging, over-discharging, overload and
shock.
Using the product for purposes other than those described above may damage the product.
Improper use can cause a short circuit, fire or other hazards.
This product complies with statutory, national and European regulations. For safety and
approval purposes, you must not rebuild and/or modify the product.
Read the operating instructions carefully and store them in a safe place. Make this product
available to third parties only together with the operating instructions.
All company and product names contained herein are trademarks of their respective owners.
All rights reserved.
USB4
, USB Type-C
and USB-C
are registered trademarks of USB Implementers Forum.
®
®
®
2 Delivery content
Product
USB Type-C
cable
®
3 Latest product information
Download the latest product information at
shown. Follow the instructions on the website.
4 Description of symbols
The following symbols appear on the product/device or in the text:
The symbol warns of hazards that can lead to personal injury.
The symbol warns of dangerous voltage that can lead to personal injury by electric
shock.
5 Safety instructions
Read the operating instructions carefully and especially observe the safety
information. If you do not follow the safety instructions and information
on proper handling in this manual, we assume no liability for any resulting
personal injury or damage to property. Such cases will invalidate the warranty/
guarantee.
5.1 General information
This device is not a toy. Keep it out of the reach of children and pets.
Do not leave packaging material lying around carelessly. It may become a dangerous
plaything for children.
Should you have any questions or concerns after reading this document, please contact
our technical support or a professional technician.
Maintenance, modifications and repairs must be carried out by a technician or a specialist
repair centre.
5.2 Handling
Handle the product carefully. Impact, shocks or a fall even from a low height can damage
the product.
Make sure that the connection cable is not squeezed, bent, damaged by sharp edges or
subjected to mechanical stress.
5.3 Operating environment
Do not expose the product to any mechanical stress.
Protect the product from extreme temperatures, flammable gases, vapours and solvents.
Protect the product from direct sunlight.
5.4 Operation
Consult an expert when in doubt about the operation, safety or connection of the device.
The housing warms up during use. Ensure that there is sufficient ventilation. Do not cover
the housing!
Do not short-circuit the inputs/outputs.
PD interface, which
®
Wrist strap
Operating instructions
www.conrad.com/downloads
or scan the QR code
If it is no longer possible to operate the product safely, stop using it and prevent
unauthorised use. DO NOT attempt to repair the product yourself. Safe operation can no
longer be guaranteed if the product:
– is visibly damaged,
– is no longer working properly,
– has been stored for extended periods in poor ambient conditions, or
– has been subjected to any serious transport-related stress.
5.5 Li-ion rechargeable battery
The rechargeable battery is permanently built into the product and cannot be replaced.
Never damage the battery. Damaging the casing of the battery may cause it to explode or
catch fire!
Never short-circuit the contacts/connections of the battery. Do not throw the battery or the
product into fire. Risk of fire and explosion!
Charge the battery regularly, even if you are not using the product. The rechargeable
battery does not need to be discharged before charging.
Do not leave the battery unattended when it is charging.
When charging the battery, place the product on a heat-resistant surface. It is normal for a
certain amount of heat to be generated during charging.
5.6 Connected devices
Always observe the safety information and operating instructions of any other devices
which are connected to the product.
5.7 LED light
Attention, LED light:
Do not look directly into the LED light!
Do not look into the beam directly or with optical instruments!
6 Overview of product
1 DC 5525 output
2 USB-A output (2x)
3 Protective cover (open)
4 USB Type-C
input/output
®
5 Charge status indicator
6 On/Off button
7 LED light
Publicité
