Cooper Lighting Solutions Galleon Instructions D'installation page 4

Installation Instructions – Galleon Quick Connect Arm
5. Fold fixture wires tightly towards the mounting arm as
sliding fixture's house side arm on to pole mounting
arm. Now tighten the center Philips head screw to 20
in-lbs. (2.3 N-M). Now fixture's house side arm and pole
mounting arm are connected. (Figure 10.)
House Sided Arm
Pole Mounting Arm
Figure 10.
6. Make wire connections inside the mounting arm. Refer
to wire diagram for power connections. Connect the
supply wires to appropriate luminaire leads. (Figure 11.)
• Supply side ground wire to green luminaire lead.
Supply side neutral wire to white luminaire lead.
•
• Supply side line voltage wire to black luminaire lead.
Line (Black)
White Common
(Black 480V)
Green Ground
Figure 11.
4
Cooper Lighting Solutions
Black
White (Black 480V)
Fixture
Green Ground
IB500004EN
Installation instructions
7 . Install arm cover and tighten Philips head screws to 20
in-lbs (2.3 N-M).
Ensure the luminaire supply leads do not get pinched
N ote:
between cover and mounting arm. (Figure 12)
Figure 12.
8. Install pole cap after completion of luminaire installation
and wiring.