Cooper Lighting Solutions Galleon Instructions D'installation page 3

Field Installed Housing Side Arm - Accessory
(Figure 6. – Figure 12.)
1. Pole mounting arm is designed for a square or round
pole. Round pole installation will require the mounting
arm break away tabs to be removed. Grab break away
tab with pliers and break-away the tabs. (Figure 6.)
Figure 6.
2. Mount the arm to the round or square pole using the
provided 1/2" x 1-3/4" long bolts, washers and nuts.
Torque bolts to 40 foot-lbs (55 N-M). (Figure 7 .)
Figure 7.
3. Mount the housing side arm to the back of the fixture's
body using provided 1/2" x 1-3/4" long bolts, washers
and nuts. Torque bolts to 40 foot-lbs. (55 N-M). Bolt is
inserted from inside of the fixture body. Pull the wires
out of center hole and towards house side arm.
(Figure 8.)
Installation Instructions – Galleon Quick Connect Arm
Pole Mounting Arm
For Round Pole
Installations,
Break Off Tabs
Cooper Lighting Solutions
1/2" Nut
Figure 8.
4. Install arm cover and tighten Philips head screws to 20
in-lbs (2.3N-M).
Ensure the luminaire supply leads do not get pinched
N ote:
between cover and mounting arm. (Figure 9.)
Figure 9.
IB500004EN
Lock Washer
Washer
Washer
1/2" Bolt
Center Hole
For Wires
Installation instructions
3