Publicité
Les langues disponibles
Les langues disponibles
8.2
REPLACE THE SCRAPER
18
18
WARNING
Use only approved replacement scrapers.
WARNING
Wear heavy gloves or wind cloth around the impeller when
you touch the impeller.
1. Remove the screws (18) from each side plate.
2. Remove and discard the old scraper (7).
3. Install the new scraper (7).
4. Put in the mounting screw (19) and spacers and tighten
them.
8.3
REPLACE THE IMPELLER
WARNING
Use only approved replacement scrapers.
1. Remove the 5 screws (18) and side wear pad (20) that
secure the right side cover (25).
25
English
19
20
18
2. Remove the nut (21).
3. Remove the 5 screws (18) and side wear pad (20) that
secure the left side cover (25).
25
4. Remove the belt (22).
11
21
20
18
22
EN
Publicité
