Klarstein 10030921 Mode D'emploi page 11

• Switch on the power source. Do not turn on the Ice maker within 30 minutes after moving the
• ice maker.
• Pour water into the water tank. Please use drinking water for making ice.
• Press key to start making ice.
Real Time Setting
Press the SET button one time,
time, minutes flash, press the
ON/OFF Timer
• Press the SET button 3 times,
time, minutes flash, press the
• Press the SET button 5 times,
time, minutes flash, press the
The timer functions take on use
Press to set timer, set the cycle timer function mode: time power on > time power off > timer off. Power on
default time is 8:00, power off default time is 12:00.
Self-Clean Mode
The self-clean mode should be put into operation before you use your ice maker for the first time
and/or if there has been a long period without use.
Three Icons as Large, Medium and small Icons will be on at the same time when the ice maker is
in self-clean mode.
Stage 1
• Add equal parts of water and vinegar (1:1) to the ice maker' s reservoir.
• With the stand-by mode, keep pressing ON/OFF button at least 5 seconds to activate the self-clean mode.
Please note that self-clean mode will start automatically after "Beep" sound.
• During the self clean mode, the upper water bucket is filled and dumped. The pump will remain in conti-
nuous operation as it feeds water to the bucket and evaporator coils. This cycle will continuous for five times.
• Upon completion, the unit automatically changes to stand-by mode.
11
All manuals and user guides at all-guides.com
Use and Operation
hour blinking, press the
button to set minutes.
hour blinking, press the
button to set minutes;
hour blinking, press the
button to set minutes;
Cleaning and Care
button to set hour, press the SET button one
button to set hour, press the SET button one
button to set hour, press the SET button one