camry CR 1158 Mode D'emploi page 4

14. SD socket
16. Earphone jack
18. Battery cover
Before first use, unpack everything and remove all protective materials. Expand the FM antenna and power cord. Do not cover the
ventilation holes, make sure there is around a few centimeters breaks needed for proper ventilation.
SETTING THE CLOCK
1. In standby mode, press TIME (8).
2. Use the buttons (5/6) to set the current hour and confirm by pressing TIME (8). The device will go into
3. Use the buttons (5/6) to set the current minute and confirm by pressing TIME (8).
SETTING THE ALARM
1. In standby mode, press and hold TIME (8).
2. Use the buttons (5/6) to set the start time of the alarm and confirm by pressing the button TIME (8).
3. Use the buttons (5/6) to set the minute and confirm by pressing TIME (8).
4. U se the buttons (5/6)to set source of alarm
5. When you hear the alarm sound, you can:
- Press the button ALARM OFF (1) to cancel the alarm
- Press the snooze button (13) to snooze the alarm for 9 minutes (up to 5 times)
6. To turn off the alarm before the preset time, press and hold ALARM OFF (1). To turn alarm back on, press and hold ALARM OFF (1)
once more.
AUTO SHUT-OFF FUNCTION
1. When the device is turned on, press and hold SLEEP (7). Press once more and hold the appropriate number of times to select the
time after which the device is switched off (90, 80, 70 ... 10 minutes).
2. After the selected time the device turns off and switches to standby mode.
FUNCTION BUTTON (2)
It is used to change the mode of operation
- AUX (mode of operating an external device)
- FM mode (FM reception)
- USB (mode of USB display)
- SD ( mode of SD display )
- BT (mode Bluetooth)
LISTENING TO RADIO
1. Turn on the device using the POWER button (1) and set the mode to radio using button FUNCTION (2).
2. Use the buttons (5/6) to tune the desired radio frequency. Press and hold for about 1-2 seconds PLAY button (8) and device will
automatically find and save all frequencies.
3. When the frequency of the desired station is found, press MEMORY (13) to save the station.
4. Use the buttons (3/4) to select the program number where you want to save a sophisticated radio station.
5. Confirm the program number again pressing the button MEMORY (13).
6. Repeat steps 3-5 to preset selected stations.
7. Using buttons (5/6), you can choose between preset programs.
8. Pressinng buttons (10/11) you can set the volume.
9. If the signal reception is weak, try moving the antenna and find a place where the signal is strongest.
PLAYING MP3 FILES FROM USB / SD
NOTE: The device may not be compatible with all files due to differences in coding. The device may not work with some memories USB /
SD. The device supports USB memory and SD cards up to 8GB.
1. Turn on the player with the POWER button (1). Place the memory in slot (USB - 15, SD card slot - 14).
2. Select the mode using button FUNCTION (2).
3. Then, the machine will start playing the first song.
4. Using the PLAY / PAUSE (8), you can pause and repeat playback of the song.
5. Using the buttons (5/6), you can choose to play either the previous or next track. Pressing and holding the button while a song is
playing will cause moving it backward or forward.
6. When playing a song, press the button REPEAT (13) to repeat all tracks. Re-pressing the button to will cause repeating od current
track.
USING YOUR DEVICE CONNECTED BY UNIVERSAL JACK INPUT AUX IN:
1. Connect the external device to the player through the AUX IN (17).
2. Switch player to AUX IN by pressing the FUNCTION (2).
USING YOUR DEVICE CONNECTED BY BLUETOOTH:
1. Put the player in Bluetooth mode by pressing the button FUNCTION (2).
2. Switch the external device to Bluetooth
CLEANING AND MAINTENANCE
1. Disconnect the device from the network.
2. The unit can be wiped with a dry cloth only.
3. The device should be stored in a dry place.
NOTE: Do not use water to clean, it can damage the device.
TECHNICAL DATA
Power supply: 110-240V ~ 50 / 60Hz or the 4 x UM1 (Lr20)
RMS Output Power: 10 W
Power: 18W
All manuals and user guides at all-guides.com
and confirm by pressing TIME
mode . Search the device and, if necessary, enter a password, "0000".
15. USB socket
17. AUX IN jack
19. Charger socket
(8).
minutes edition mode .