Publicité
Les langues disponibles
Les langues disponibles
Installation / Operation
TEMPERATURE CONTROLS
The temperature controls are factory-set to maintain an average temperature of 38°F in refrigeration. To
maintain a different temperature, simply adjust the control knob located inside the unit. To decrease the
temperature (colder), turn clockwise. To increase the temperature(warmer), turn counter-clockwise – see
diagram.
LOADING PRODUCT
The bin dividers have been installed at the factory for your convenience. Feel free to reposition the dividers
as you see fit. To remove the bin dividers, simply push the divider towards the back wall unit the front of the
divider is removed from the positioning holes. To install, position the divider to the desired holes, making sure
that the pressure spring is installed properly.
PAY CLOSE ATTENTION TO THE LOAD LIMIT STICKERS LOCATED ON THE INTERIOR WALLS TO THE
UNIT. DO NOT LOAD PRODUCT ABOVE THE LOAD LIMIT STICKERS OR ABOVE THE TOP CROSS BAR
OF THE BIN DIVIDERS. LOADING PRODUCT ABOVE THE LOAD LIMIT STICKERS WILL HARM THE
PERFORMANCE OF THE UNIT.
CAUTION
Setting the temperature control to the coldest setting may cause the Evaporator coil to freeze and ice up. This
will eventually result in a warmer Cabinet temperature.
Safety
Please pay close attention to the safety notices in this section. Disregarding these notices may lead to
serious injury and/or damage to the unit.
ATTENTION
• To minimize shock and fire hazards, be sure not to overload outlet. Please designate one outlet for your
All manuals and user guides at all-guides.com
4
Temperature range from 7 (coldest) to 1
(warmest).
Do not load Product above the top crossbar.
Doing so will harm the Refrigeration.
Publicité
