Harol OB910 THERMO IR Notice De Montage page 30

OB910 THERMO IR MOUNTING INSTRUCTIONS
3.5. Installing the guide rails
3.5/1
• Thread the roller shutter into the guide rail.
• Press the guide rails onto the nipple screws.
3.5/2
The guide rails must finish flush with the roller
shutter box at the top.
• Push the guide rails upwards.
• Pull the bottom rail with its stoppers through the
inlet funnel into the guides.
PLEASE NOTE: Check that the stoppers can no
longer pass through the inlet funnel.
the inlet funnel = stop for the stoppers
3.5/3
• Click on the roll down profile. Press the roller
shutter slightly upwards and insert the roll down
profile behind it.
01/19 | EN | 30