Harol OB910 THERMO IR Notice De Montage page 24

OB910 THERMO IR MOUNTING INSTRUCTIONS
Document symbols
• Prompt for action
— List, enumeration
) Factory setting
✓ Check
G Tip
à Reference to another place in this document
4 Reference to separate documents that need to
be observed
Installation symbols
Inside
Outside
1. General safety information
DANGER!
Danger to life through non-observance of the
documentation!
• The safety information and instructions in this
document must be observed.
1.1. Intended use
— The roller shutter box is specifically for shading,
isolating and protecting window openings in
new buildings.
1.2. Target group
— Qualified, trained experts.
Requirements of qualified, trained experts:
— Knowledge of general and specific safety and
accident prevention regulations.
— Knowledge of the RAL installation guidelines.
— Training in the use and maintenance of
appropriate safety equipment.
1.3. Guarantee
— The product is approved for use in a safe and
technically flawless condition.
— The safety information in these instructions must
be observed for any warranty relating to function
and safety. The manufacturer is not liable for
damage caused by non-observance of the safety
information.
— The manufacturer is not liable for damage
caused by improper use and inappropriate
handling.
— Converting or changing the product and the use
of spare parts not approved by the manufacturer
are not permitted.
— The manufacturer is not liable for damage arising
from this. The guarantee for the product and
accessories will no longer be applicable.
HAROL
Industrieterrein 1/3
I.Z. Webbekom 1025
3290 Diest, Belgium
T + 32 13 38 01 11
T + 32 13 31 48 03
info@harol.com
01/19 | EN | 24