Harol OB910 THERMO IR Notice De Montage page 27

OB910 THERMO IR MOUNTING INSTRUCTIONS
3.2.1. Version 1: Attaching the box to the window.
3.2/2
Attach the roller shutter box to the window.
y
Slide the roller shutter box in at a slight angle,
from the front to the rear.
* The roller shutter is correctly mounted if the white
bottom of the indicated profile is visible.
3.2/3
Screw the anchors tightly to the window frame.
y
Make sure that the screws penetrate the steel
core of the window.
3.2.2. Version 2: Attaching the window to the roller
shutter box.
3.2/3
Place the window on the roller shutter box.
y
Slide the window in at a slight angle, from the
front to the rear.
* The roller shutter is correctly mounted if the white
bottom of the indicated profile is visible.
3.2/4
Screw the anchors tightly to the window frame.
y
Make sure that the screws penetrate the steel
core of the window.
01/19 | EN | 27