Harol OB910 THERMO IR Notice De Montage page 23

OB910 THERMO IR MOUNTING INSTRUCTIONS
Table of contents
1. General safety information
1.1 Intended use
1.2 Target group
1.3 Guarantee
2. Product overview
2.1 Installation dimensions
2.2 Scope of delivery
3. Installation
3.1 Preparing to install
3.2 Connecting the window
and roller shutter box
3.3 Installing nipple screws
3.4 Installing the roller shutter box
3.5 Installing guide rails
3.6 Concluding work
4. Disassembly
5. Brackets
About this document
27
— Original instructions.
27 — Part of the product.
27 — Must be read and kept for future reference.
27 — Protected by copyright.
— Reproduction, reprinting and forwarding,
28
including in part, with prior permission only.
28 — Subject to amendments for the purpose of
28 technological advancement.
— Measurements in millimetres.
29 — Illustrations are not to scale.
29
Safety information
29
31
DANGER!
32
32
34
Safety information on a hazard with a high
degree of risk!
34
Non-observance will directly cause death or
serious injury.
34
WARNING!
Safety information on a hazard with a medium
degree of risk!
Non-observance may cause death or serious
injury.
CAUTION!
Safety information on a hazard with a low
degree of risk!
Non-observance may cause slight to moderate
injury.
NOTE!
Safety information on a hazard with a low
degree of risk!
Non-observance may cause damage to or
destruction of the product.
01/19 | EN | 23