Publicité
Les langues disponibles
Les langues disponibles
3.
NOTE: It isrecommended
thatthedrain hose belooped u p
and securely fastened totheunderside ofthecounter.
Use arubber hose connector (not p rovided) with screw-type
clamps ( not p rovided) toconnect theairgap tothe waste tee
above t hedrain t rapand atleast 2 0"(50.8 cm) a bove t he floor.
A
B
A
B
C
4.
E
A. Drain hose-- cut here, if needed
B. Screw-type
clamps (not provided)
C. Air gap
D. Large drain hose clamp
(provided)
E. Drain hose
F. Rubber hose connector
(not provided)
G. Waste tee
H. Drain trap
Insert the drain hose through the hole cut in the cabinet and to
the front and center of the opening where the drain
connection will be made.
3.
A. Large drain hose clamp (provided)
B. Drain hose
C. Disposer inlet
D. Drain trap
Insert the drain hose through the hole cut in the cabinet and to
the front and center of the opening where the drain
connection will be made.
A
A. Drain hose
A. Drain hose
Connect
Drain Hose to Waste Disposer--
No Air Gap
1. Remove the waste disposer knockout plug.
NOTE: Do not cut the end of the drain hose.
2. Attach the drain hose to the waste disposer inlet with the large
drain hose clamp (provided).
This connection must be before the drain trap and at least 20"
(50.8 cm) above the floor.
1.
2.
Connect Drain Hose-- No Waste Disposer or Air Gap
Cut the end of the drain hose, if needed.
NOTE: Do not cut the ribbed section.
Attach the drain hose to the waste tee with the large drain
hose clamp (provided).
NOTES:
If the drain hose was cut, use 11/2"to 2" (3.8 to 5 cm)
screw-type clamp (not provided).
This connection must be before the drain trap and at least
20" (50.8 cm) above the floor.
It is recommended
that the drain hose be looped up and
securely fastened to the underside of the counter.
A
£
A. Drain
hose--
cut here,
if needed
B. Large drain hose clamp (provided)
C. Drain hose
D. Drain trap
E. Waste tee
C
8
Publicité
