Kenwood FP910 Serie Manuel D'instructions page 6

choosing a speed for all functions
Tool/Attachment
Knife Blade
Knife Blade with maxi-blend canopy
Whisk
Dough tool
Discs – slicing/shredding/chipping
Rasping disc
Citrus Press
Mini Bowl & knife
Liquidiser
Mini chopper/Mill
Centrifugal juicer
to use your food processor
1 Fit the detachable shaft onto the power unit
2 Then fit the bowl. Place the handle towards the back and
turn clockwise until it locks
3 Fit an attachment over the drive shaft.
Always fit the bowl and attachment onto the machine before
●
adding ingredients.
4 Fit the lid - ensuring the top of the drive shaft locates into
the centre of the lid.
Do not use the lid to operate the processor, always
●
use the on/off control.
5 Plug in and the power on light will come on. Switch on and
select a speed.
The processor won't work if the bowl and lid are
●
fitted incorrectly.
Use the pulse (P) for short bursts. The pulse will operate for as
●
long as the control is held in position.
6 Reverse the above procedure to remove the lid, attachments
and bowl.
Always switch off before removing the lid.
●
important
Your processor is not suitable for crushing or grinding coffee
●
beans, or converting granulated sugar to caster sugar.
When adding almond essence or flavouring to mixtures avoid
●
contact with the plastic as this may result in permanent
marking.
All manuals and user guides at all-guides.com
Function
One Stage Cake Mix
Pastry - rubbing fat into flour
Adding water to combine pastry ingredients
Chopping/pureeing/pates
Soups – start at a low speed and move up to Max
Egg Whites
Egg & sugar for fatless sponges
Cream
Yeasted mixes
Firm food items such as carrots, hard cheese.
Softer items such as cucumbers, tomatoes
Parmesan cheese, Potatoes for German
potato dumplings.
Citrus fruits
All processing
All processing
All processing
Fruit & Vegetables
.
.
Speed
Min – Max 1.5Kg/3lb 5oz Total Wt
5 – Max
1 – 5
Max
Min –Max
Max
Max
5 – Max
Max
5 – Max
Min – 5
Max
1
Max
Max
Max
Max
to use your liquidiser (FP910)
1 Fit the sealing ring into the blade unit
located correctly. Leaking will occur if the seal is
damaged or not fitted correctly.
2 Screw the jug onto the blade unit.
3 Put your ingredients into the jug.
4 Put the filler cap in the lid, then turn.
5 Turn the lid in a clockwise direction
6 Place the liquidiser onto the power unit and turn to lock
7 Select a speed or use the pulse control.
to use your liquidiser (FP920)
1 Fit the sealing ring into the blade unit
is located correctly. Leaking will occur if the seal is
damaged or not fitted correctly.
2 Screw the jug onto the blade unit.
3 Put your ingredients into the jug.
4 Fit the lid to the goblet and push down to secure
filler cap.
5 Place the liquidiser onto the power unit and turn to lock
6 Select a speed or use the pulse control.
Liquids should be allowed to cool to room
●
temperature before blending.
4
Maximum Capacities
340g/12oz Flour Wt
600g/1lb 6oz Meat
1.5 litres/2pts 12oz
6 Egg Whites
500 mls
600g/1lb 6oz
200g/8oz
1.5 litres/2pts 12fl.oz
450g/1lb
- ensuring the seal is
to lock onto the jug.
.
- ensuring the seal
. Fit the
.