Ferm HDM1028 Notice Originale page 4

Rotary Hammer drill
Thank you for buying this FERM product. By
doing so you now have an excellent product,
delivered by one of Europe's leading suppliers.
All products delivered to you by Ferm are
manufactured according to the highest standards
of performance and safety. As part of our
philosophy we also provide an excellent customer
service, backed by our comprehensive warranty.
We hope you will enjoy using this product for
many years to come.
1. SAFETY WARNINGS
WARNING
Read the enclosed safety warnings,
the additional safety warnings and
the instructions. Failure to follow the safety
warnings and the instructions may result in
electric shock, fire and/or serious injury. Save the
safety warnings and the instructions for future
reference.
The following symbols are used in the user
manual or on the product:
Read the user manual.
Denotes risk of personal injury, loss of life
or damage to the tool in case of non-
observance of the instructions in this
manual.
Risk of electric shock
Immediately remove the mains plug from
the mains if the mains cable becomes
damaged and during cleaning and
maintenance.
Always wear eye protection!
Wear hearing protection.
4
HDM1028 Ma 1611-07.indd 4
All manuals and user guides at all-guides.com
Additional safety warnings for rotary
hammers
a) Wear ear protectors. Exposure to noise can
b) Use auxiliary handle(s), if supplied with the
c) Hold power tool by insulated gripping
Electrical safety
When using electric machines always observe the
safety regulations applicable in your country to
reduce the risk of fire, electric shock and personal
injury. Read the following safety instructions and
also the enclosed safety instructions.
If operating a power tool in a damp location is
unavoidable, use a residual current device (RCD)
protected supply. Use of an RCD reduces the risk
of electric shock.
Replacement of power cords or plugs
If the supply cord is damaged, it must be replaced
by the manufacturer, its service agent or similarly
qualified persons in order to avoid a hazard.
Wear safety gloves.
Do not dispose of the product in
unsuitable containers.
The product is in accordance with the
applicable safety standards in the
European directives.
cause hearing loss.
tool. Loss of control can cause personal injury.
surfaces, when performing an operation
where the cutting accessory may contact
hidden wiring or its own cord. Cutting
accessory contacting a "live" wire may make
exposed metal parts of the power tool "live"
and could give the operator an electric shock.
Always check that the voltage of the
power supply corresponds to the voltage
on the rating plate label.
Class II machine - Double insulation - You
don't need any earthed plug.
Mains plu
If the moul
damaged a
that it is co
an approve
the followin
The wires i
accordanc
• b lue
• b rown
As the colo
of the unit
markings i
proceed as
• T he wir
connec
with the
• T he wir
connec
with the
Use of ext
Only ever u
suitable fo
minimum c
using a ree
lead.
Immediate
• E xcess
• I nterrup
mains l
• D efect
• S moke
2. MA
Intended u
This rotary
in masonry
material. F
as a demo
SDS cold c
account in
23/11/16 16:35
N