Bosch Tronic 8500 TR8500 21/24 DESOAB Notice D'utilisation page 11

Operating the appliance
• Turn the rotary selector switch to the desired new temperature.
• Press and hold the key. The new temperature setting is saved
when the display shows the symbol
as well as a readout of the new temperature.
Note: The comfort keys can also be used by several different users as
individual "Temperature keys". Select any of the keys and save your own
specific "wellness temperature".
Note: The factory setting for the water temperature after the first start-
up or a power failure is less than
3.3 Using the menu
The appliance requires less energy to heat the water and therefore
economises on costs. The consumption figures for energy, water and
the resulting costs can be displayed. In order to retrieve the consumption
figures, it is necessary to make some settings via the menu.
Open the menu
• Press and hold the rotary selector switch for at least
5 seconds.
Select the menu items
The following menu items can be selected:
• Turn the rotary selector switch: to switch between
the menu items in the current menu level.
• Briefly press the rotary selector switch: to navigate
to the next menu level or to confirm a selection.
Note: Following a successful entry, the selected value will be displayed
for 10 seconds.
Exit the menu
• Select Zurück [back] in the menu.
or
• Press any comfort key.
Note: If no entry is made within 30 seconds, then the appliance
automatically exits the menu.
3.4 Menu item Einstellung [setting]
Important: The entries for Datum / Uhrzeit [date / time] and Kosten
[cost] are required in order to subsequently retrieve consumption
figures from Verbrauch [consumption]. If no entry is made,
then the appliance only displays partial values.
Example of a menu setting
In this example, the language is to be set to Englisch [english].
The factory setting for the menu language is Deutsch [german].
To change the language to Englisch [english]:
• Press and hold the rotary selector switch for at least 5 seconds.
• Turn the rotary selector switch and select Einstellung [setting].
Press the rotary selector switch.
• Turn the rotary selector switch and select Sprache [language].
Press the rotary selector switch.
10
and the text "Washing hands"
35 °C.
• Turn the rotary selector switch and select Englisch [english].
Press the rotary selector switch. The language is now set to English.
• Wait a moment or press the rotary selector switch.
• Turn the rotary selector switch. Select other menu items and enter
settings.
or
• Press any comfort key to exit the menu.
The following settings can be selected
Verbrauch
[consumption]
Einstellung
[setting]
Sprache
[language]
Datum / Uhrzeit
[date / time]
Kosten
[cost]
Reset
[reset]
Anzeige prüfen
[display test]
Zurück
[back]
Zurück
[back]
3.5 Menu item Verbrauch [consumption]
Note: If either no entry is input or if the entry is incomplete under
Einstellung [setting], then only the consumption figures accumulated
since initial start-up (or since last reset) are displayed: Gesamtlaufzeit
[total currency].
Example of a consumption readout
To display the energy consumption:
• Press and hold the rotary selector switch for at least 5 seconds.
Press and hold
for 5 seconds
Display consumption figures,
see chapter "Menu item
Verbrauch [consumption]"
Enter settings
Set language to German
or English
Enter current date
and time (in order
to retrieve consumption
figures later on)
Enter cost for Energie [energy]
per kWh and Wasser [water]
3
per m (in order to retrieve
consumption figures later on)
Delete all individual
entries and reload factory
default settings
Show all symbols
One menu level back
Exit the menu
6 720 876 029 (2020/01)